Ul Certification Conditions - Siemens SIPROTEC 4 Manual

Technical Data
4.1 General Device Data
For operator protection
Degree of pollution, IEC 60255-27

UL certification conditions

4.1.10
Output Relays
Voltage Inputs
Battery
Climatic Stress Tests
Design
362
DC 24 V
DC 48 V
DC 240 V
AC 240 V
AC 120 V
AC 250 V
B300, R300
Input voltage range
Servicing of the circuitry involving the batteries and replacement of the lithium
batteries shall be done by a trained technician.
Replace Battery with VARTA or Panasonic Cat. Nos. CR 1/2 AA or BR 1/2 AA only. Use
of another Battery may present a risk of fire or explosion. See manual for safety
instructions.
Caution: The battery used in this device may present a fire or chemical burn hazard
if mistreated. Do not recharge, disassemble, heat above 100 °C (212 °F) or incin-
erate.
Dispose of used battery promptly. Keep away from children.
Surrounding air temperature
Field Wires of Control Circuits shall be separated from other circuits with respect to
the end use requirements!
Type 1 if mounted into a door or front cover of an enclosure.
IP 2x for current terminal
IP 2x for voltage terminal
2
5 A General Purpose
0,8 A General Purpose
0,1 A General Purpose
5 A General Purpose
1/3 hp
1/2 hp
300 V
tsurr: max. 70 °C (158 °F), normal opera-
tion
E50417-G1140-C343-A8, Edition 12.2017
SIPROTEC 4, 7SJ80, Manual