Settings - Siemens SIPROTEC 4 Manual

Functions
2.1 General
2.1.1.3

Settings

Addr. Parameter
103 Grp Chge OPTION
104 OSC. FAULT REC.
112 Charac. Phase
113 Charac. Ground
115 67/67-TOC
116 67N/67N-TOC
117 Coldload Pickup
122 InrushRestraint
127 50 1Ph
130 S.Gnd.F.Dir.Ch
131 Sens. Gnd Fault
133 INTERM.EF
134 Dir. Interm. EF
135 E Flt(ext)
140 46
142 49
32
Setting Options
Disabled
Enabled
Disabled
Enabled
Disabled
Definite Time
TOC IEC
TOC ANSI
Disabled
Definite Time
TOC IEC
TOC ANSI
Disabled
Definite Time
TOC IEC
TOC ANSI
Disabled
Definite Time
TOC IEC
TOC ANSI
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
cos φ / sin φ
V0/I0 φ mea.
Disabled
Definite Time
User Defined PU
Disabled
with Ignd
with 3I0
with Ignd,sens.
Disabled
Enabled
Disabled
EPTR
Trans. Neutral
Disabled
TOC ANSI
TOC IEC
Definite Time
Disabled
No ambient temp
Default Setting Comments
Disabled Setting Group Change Option
Enabled Oscillographic Fault Records
Definite Time 50/51
Definite Time 50N/51N
Definite Time 67, 67-TOC
Definite Time 67N, 67N-TOC
Disabled Cold Load Pickup
Disabled 2nd Harmonic Inrush Restraint
Disabled 50 1Ph
cos φ / sin φ (sens.) Ground fault dir. character-
istic
Disabled (sensitive) Ground fault
Disabled Intermittent earth fault protection
Disabled Dir. Intermittent earth fault
protection
Disabled Earth Fault(extend)
Disabled 46 Negative Sequence Protection
No ambient temp 49 Thermal Overload Protection
E50417-G1140-C343-A8, Edition 12.2017
SIPROTEC 4, 7SJ80, Manual