Siemens SIPROTEC 4 Manual page 467

[grundbild6zei-ohne-u-ohne-erw-mw-20070116, 1, en_US]
Figure E-3
[grundbild6zei-ohne-u-und-erw-mw-20070116, 1, en_US]
Figure E-4
Spontaneous Fault Display
After a fault has occurred, the most important fault data are automatically displayed after general device
pickup in the order shown in the picture below.
[anzeige-spontanmeldungen-im-display-des-geraetes-260602-kn, 1, en_US]
Figure E-5
SIPROTEC 4, 7SJ80, Manual
E50417-G1140-C343-A8, Edition 12.2017
Default display of the 7SJ80 for models without V and extended measured values
Default display of the 7SJ80 for models without V with extended measured values
Representation of spontaneous messages on the device display
Default Settings and Protocol-dependent Functions
E.5 Default Display
467