| Advanced Configuration
C
10
HAPTER
IP QoS
IP Q
S
O
The QoS setting page is used to configure Quality of Service (QoS) for
Traffic Prioritization and Bandwidth Management. Quality of Service (QoS)
provides users the control over which type of outgoing data traffic is given
priority by the router. The throughput rate of both the upload and
download data passed through the ADSL Router can be throttled.
The QoS is enforced by the QoS rules in the QoS table. A QoS rule contains
two configuration blocks: Traffic Classification and Action.
Figure 71: IP QoS
The following items are displayed on this pages:
IP QoS — Enables IP QoS. (Default: Disabled)
◆
Default QoS — Specifies the type of QoS used. (Options: IP Pred,
◆
802.1p; Default: IP Pred)
S
T
C
PECIFY
RAFFIC
LASSIFICATION
The Traffic Classification enables you to classify packets on the basis of
various fields in the packet and perhaps the physical ingress port.
Source/Destination IP — The source/destination IP address.
◆
Netmask — Source/destination IP network mask. (Format: Four
◆
integers from 0 to 255, each separated by a period)
– 118 –
R
ULES