| WAN Configuration
C
5
HAPTER
Channel Configuration
Protocol — Displays the protocol used for transmission of data
◆
packets.
ATM VCC — Displays the virtual channel connection (VCC) to the
◆
remote ATM switch formed by the combination of the VCI and VPI.
Status — Allows the user to enable or disable the link.
◆
Use DHCP — Allows the user to disable fixed IP address and use DHCP.
◆
Local IP Address — Specifies a local IP address.
◆
◆
Remote IP Address — Specifies a remote IP address on the ATM
server.
Subnet Mask — Specifies a subnet mask.
◆
Default Route — Enables/disables a default route.
◆
Bridge — Allows the user to select the connection protocol, such as
◆
PPPoE, or disable it.
MTU — Sets the maximum transmission unit (MTU), the size of the
◆
largest packet that a network protocol can transmit.
Apply Changes — Applies the user specified changes.
◆
Return — Returns to the previous creen without making changes.
◆
Undo — Undoes any changes to the connection made by the user and
◆
restores the originals.
A
- D
CTIONS
ELETE
Selecting the trashcan icon will open a window asking you to confirm if you
want to delete the configured connection. Click "OK" to delete the
connection, or "Cancel" to return to the previous screen.
Figure 27: Confirm Delete
– 62 –