Step 2 - Lan Settings; Figure 11: Wizard - Step 2 - Lan Settings - SMC Networks BARRICADE SMC7901WBRA2 B1 User Manual

■
■
Connection Type — Your connection type will also be specified by your
◆
service provider. Choose from the following options:
■
■
MTU — This is a preset field and does not require configuration. For
◆
more information see
VPI — This is a preset field and does not require configuration. For
◆
more information see
VCI — This is a preset field and does not require configuration. For
◆
more information see
Username — Enter the username provided by your service provider.
◆
Password — Enter the password provided by your service provider.
◆
Confirm Password — Re-enter your password.
◆
◆ Next — Proceeds to the next step.
The Step 2 page of the Wizard configures the LAN connection type for the
S 2 - LAN
TEP
ADSL Router.
S
ETTINGS

Figure 11: Wizard - Step 2 - LAN Settings

1483 Router (IPoA) — Dynamic IP over ATM (IPoA).
1483 Bridged — The Bridged RFC 1483 Encapsulated Traffic over
ATM feature allows you to send bridged RFC 1483 encapsulated
packets over ATM switched virtual circuits (SVCs).
VC-Mux — Virtual circuit multiplexing (VC-Mux).
LLC/SNAP — Logical Link Control (LLC).
"Current ATM VC Table" on page 64
"Channel Configuration" on page
"Channel Configuration" on page
– 39 –
| Initial Configuration
C 3
HAPTER
59.
59.
Wizard