Table of Contents
Advertisement
| Firewall Configuration
C
8
HAPTER
Port Forwarding
P
F
ORT
ORWARDING
Port forwarding (sometimes referred to as tunneling) is the act of
forwarding a network port from one network node to another. This
technique can allow an external user to reach a port on a private IP
address (inside a LAN) from the outside through a NAT-enabled router.
(Maximum 32 entries are allowed.)
Figure 49: Port Forwarding Settings
The following items are displayed on this page:
◆
Port Forwarding — Selects between enabling or disabling port
forwarding on the unit. (Default: Disable)
Apply Changes — Applies the port forwarding selection.
◆
◆
Protocol — Specifies a protocol to use for port forwarding, either TCP,
UDP or both.
◆
Comment — Enter a useful comment to help identify the forwarded
port service on the network.
Enable — Checking this box activates the parameters configurated
◆
once added to the Current Port Forwarding Table. (Default: Enabled)
– 92 –
Advertisement
Table of Contents
