6.4
Set IP Address of the QuickServer
6.4.1 Using the Toolbox Application to set the IP Address
From the Toolbox main page, click on the setup icon (the gear picture).
Select Network Settings.
Modify the IP Address (N1 IP Address field) of the QuickServer Ethernet port.
NOTE: If the QuickServer is connected to a router, the IP Gateway of the QuickServer should be set to
the IP Address of that router.
The following fields may also be changed as needed:
o
Netmask (N1 Netmask field)
o
DHCP Client State (N1 DHCP Client State field)
o
IP Gateway (Default Gateway field)
o
DNS 1 & 2 (Domain Name Server fields)
NOTE: Do not change the DHCP Server State (N1 DHCP Server State field).
NOTE: If DNS settings are not known, setting DNS1 to "8.8.8.8" and DNS2 to "8.8.4.4" is recommended.
Page 21 of 46
QuickServer Start-Up Guide