Wpa Security; Figure 43: Wireless Security Setup - Wpa/Wpa2 Setup - SMC Networks BARRICADE SMC7901WBRA2 B1 User Manual

WPA S
ECURITY
Auto: Automatically selects the best authentication type to use.
■
Key Length — Selects between 64 bit and 128 bit keys.
◆
◆ Key Format — Selects the preferred method of entering WEP
encryption keys on the unit:
Alphanumeric: Enter keys as 5 alphanumeric characters for 64 bit
■
keys, 13 alphanumeric characters for 128 bit keys. This is the
default setting.
Hexadecimal: Enter keys as 10 hexadecimal digits (0-9 and A-F) for
■
64 bit keys, or 26 hexadecimal digits for 128 bit keys.
Default Tx Key — Selects the default key used for transmission.
◆
Encryption Key 1~4 — Specifies the user defined WEP keys.
◆
The following section describes WPA, WPA2 and WPA2-mixed settings.

Figure 43: Wireless Security Setup - WPA/WPA2 Setup

The following items are displayed on this page:
WPA Authentication Mode — Selects between modes of WPA
◆
authentication. Options are:
Enterprise: Uses a RADIUS server for authentication. This applies
■
to enterprise deployment.
Personal: Uses a pre-shared key for authentication.
■
– 81 –
| WLAN Configuration
C 7
HAPTER

WPA Security