Mac Filtering; Figure 48: Mac Filtering Settings - SMC Networks BARRICADE SMC7901WBRA2 B1 User Manual

| Firewall Configuration
C 8
HAPTER

MAC Filtering

MAC F
ILTERING
MAC based packet filtering enables the ADSL Router to filter clients based
on their physical layer address.

Figure 48: MAC Filtering Settings

The following items are displayed on this page:
Outgoing Default Action — A default action for MAC addresses not
◆
configured in the filter table. (Default: Allow, maximum 32 entries are
allowed.)
◆ Incoming Default Action — A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries.)
The default outgoing and incoming defaults allow traffic from all MAC
N :
OTE
addresses.
Direction — Specifies the packet destination. (Default: Outgoing)
◆
Rule Action — Specifies if traffic should be permitted or denied.
◆
(Options: Deny, Allow; Default: Deny)
– 90 –