| Advanced Configuration
C
10
HAPTER
Routing Configuration
Metric — Defines the number of hops between network nodes that
◆
data packets travel. The default value is 0, which means that the
subnet is directly one hop away on the local LAN network.
◆
Interface — The WAN interface to which a static routing subnet is to
be applied.
Add Route — Adds a static route to the Static Route Table.
◆
Update — Clears the above fields.
◆
Delete Selected — Deletes the specified static route.
◆
S
R
T
TATIC
OUTE
ABLE
This table displays all the configured static routes.
Select — Highlights an entry in the Static Route Table.
◆
State — Displays if the route is enabled or disabled.
◆
Destination — Displays the final destination of the routed packets.
◆
Subnet Mask — Displays the subnet mask.
◆
Next Hop — The next hop that the packets will be routed to on their
◆
way to their final destination.
◆
Metric — Displays the number of hops from router to router that the
packets must make before reaching their final destination.
IF — Displays the interface the packets will be routed on.
◆
– 116 –