Table of Contents
Advertisement
The following items are displayed on this page:
Bridged Interface — Displays a virtual interface.
◆
◆
Protocol — Displays the protocol used for transmission of data
packets.
ATM VCC — Displays the virtual channel connection (VCC) to the
◆
remote ATM switch formed by the combination of the VCI and VPI.
Status — Allows the user to enable or disable the link.
◆
◆
Mode — Allows the user to select the connection protocol, such as
PPPoE, or disable it.
Apply Changes — Applies the user specified changes.
◆
Return — Returns to the previous creen without making changes.
◆
Undo — Undoes any changes to the connection made by the user and
◆
restores the originals.
The example below shows an IP Interface.
Figure 26: Editing an IP entry in the Current ATM VC Table
The following items are displayed on this page:
◆
IP Interface — Displays the name of the virtual interface.
– 61 –
| WAN Configuration
C
5
HAPTER
Channel Configuration
Advertisement
Table of Contents
