Figure 42: Wireless Security Setup - Wep Key Setup - SMC Networks BARRICADE SMC7901WBRA2 B1 User Manual

| WLAN Configuration
C 7
HAPTER
Wireless Security Setup
RADIUS S
ERVER
Port — Specifies the port number used to communicate with the
◆
RADIUS server.
IP Address — Specifies the IP address used to communicate with the
◆
RADIUS server.
Password — Specifies the key necessary for RADIUS server
◆
authentication.
WEP K S
EY ETUP
The following page describes the WEP key setup.

Figure 42: Wireless Security Setup - WEP Key Setup

The following items are displayed on this page:
SSID Type — Selects the VAP to configure the WEP security settings
◆
to.
Authentication Type — Selects the authentication type to use.
◆
Options are:
Open System: If you don't set up any other security mechanism
■
on the access point, the network has no protection and is open to all
users. This is the default setting.
Shared Key: Sets the access point to use WEP shared keys. If this
■
option is selected, you must configure at least one key on the
access point and all clients.
– 80 –