T
Z
IME
ONE
Add — Adds the ACL to the ACL Table.
◆
ACL T
ABLE
Lists the configured ACLs on both LAN and WAN ports, status and IP
address.
Select — Highlights the ACL parameters for editing.
◆
State — Displays if the ACL is currently implemented or not.
◆
Interface — Displays if the ACL has been configured on the LAN port
◆
or the WAN port.
IP Address — Displays the allowed IP address.
◆
The Date/Time page allows you to manually configure time settings or
enable the use of an NTP server.
Figure 64: Time Zone and SNTP Configuration
The following items are displayed on this page:
Current Time — Allows you to manually configure time settings for the
◆
region that you are in.
Time Zone Select — Allows you to select your current location or
◆
nearest city. All time zones are given in Greenwich Mean Time (GMT).
◆
SNTP client update — Enables SNTP (Simple Network Time Protocol).
(Default: Disabled)
◆
SNTP server — Specifies an SNTP server in your region, or you may
manually enter the IP address of an SNTP server you know.
– 109 –
| Administration Settings
C
9
HAPTER
Time Zone