Bacnet/Ip Or Modbus Tcp/Ip: Change The Protonode Ip Address; Connect The Pc To Protonode Via The Ethernet Port - SMC Networks ProtoNode FPC-N34 Manual

4

BACNET/IP OR MODBUS TCP/IP: CHANGE THE PROTONODE IP ADDRESS

4.1 Connect the PC to ProtoNode via the Ethernet Port

•
Connect a CAT5 Ethernet cable (Straight through or Cross-Over) between the local PC and
ProtoNode.
•
The Default IP Address of ProtoNode is 192.168.1.24, Subnet Mask is 255.255.255.0. If the PC
and ProtoNode are on different IP Networks, assign a static IP Address to the PC on the
192.168.1.xxx network.
•
For Windows XP:
Go to
Right-click on Local Area Connection > Properties
Highlight
•
For Windows 7 or later:
Go to
>
Right-click on Local Area Connection > Properties
Highlight
•
For Windows XP and Windows 7, use the following IP Address:
•
Click
>
> >
>
twice.
Page 22 of 50
>
>
>
ProtoNode Startup Guide