Configuring Your Computer For Tcp/Ip; Configuring Microsoft Windows 2000 - SMC Networks SMCD3GNV User Manual

Configuring Your Computer for TCP/IP

Before you configure the Gateway using its Web management interface, configure TCP/IP
settings on the computer that will be used to configure the Gateway. The TCP/IP procedure
to use depends on the operating system installed on the computer.
For Microsoft Windows 2000, see the procedure below

For Microsoft Windows XP, see page 26

For Microsoft Windows Vista, see page 27

For Microsoft Windows 7, see page 30

For Apple Macintosh, see page 33


Configuring Microsoft Windows 2000

Use the following procedure to configure your computer if your computer has Microsoft
Windows 2000 installed.
1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel.
2. In the Control Panel window, double-click the Network and Dial-up Connections icon. If
the Ethernet adapter in your computer is installed correctly, the Local Area Connection
icon appears.
3. Double-click the Local Area Connection icon for the Ethernet adapter connected to the
Gateway. The Local Area Connection Status dialog box appears (see Figure 8).
Preconfiguration Guidelines
Figure 8. Local Area Connection Status Window
SMCD3GNV Wireless Cable Modem Gateway User Manual
25