Table of Contents
Advertisement
The following items are displayed on this page:
B
S
ASIC
ETTINGS
Disable Wireless LAN Interface — Enables/disables the wireless
◆
802.11b/g interface.
SSID — Specifies an SSID (service set identifier) which must be the
◆
same as that on all wireless clients that wish to associate with the unit.
Channel Number — Specifies the radio channel number which must
◆
be the same as that on all wireless clients that wish to associate with
the unit. The ADSL Router is set to automatically detect channel
settings of wireless devices. (Default: Auto; Range: 1~11)
S
S
ECURITY
ETTINGS
This section configures security settings to protect from intruders accessing
your network.
Encryption — Specifies the security used to protect your wireless
◆
network. (Default: None)
None: Allows any wireless client within range to associate with the
■
ADSL/Router.
WEP: Provides a basic level of security using static shared keys that
■
are distributed to all clients. Be sure to configure at least one static
key. Alternatively, enable 802.1X authentication to dynamically
create and distribute keys from a RADIUS server.
WPA(TKIP): Wi-Fi Protected Access (WPA) using either a static
■
pre-shared key, or 802.1X authentication through a RADIUS server.
WPA2(AES): WPA2 using either a static pre-shared key, or 802.1X
■
authentication through a RADIUS server.
WPA2 Mixed: WPA and WPA2 using either a static pre-shared key,
■
or 802.1X authentication through a RADIUS server.
– 41 –
| Initial Configuration
C
3
HAPTER
Wizard
Advertisement
Table of Contents
