| Installing the ADSL Router
C
2
HAPTER
Connecting and Powering On
C
P
ONNECTING AND
Figure 7: Wall Mounting Screws
O
OWERING
N
Connect the AC power adapter to the ADSL Router, and the power cord to
an AC power outlet.
Use ONLY the power adapter supplied with this ADSL Router.
C
:
AUTION
Otherwise, the product may be damaged.
Observe the Power LED – When you power on the ADSL Router,
1.
verify that the Power indicator turns on, and that the other indicators
start functioning as described under
Connect the Ethernet Cable – The ADSL Router can be connected to
2.
a 10/100 Mbps Ethernet network through a device such as a hub or a
switch. Connect your network to the RJ-45 port on the back panel with
Category 5 or better UTP Ethernet cable. When the ADSL Router and
the connected device are powered on, the Ethernet Link LED should
turn on indicating a valid network connection.
The RJ-45 port on the ADSL Router supports automatic MDI/MDI-X
N
:
OTE
operation, so you can use straight-through cables for all network
connections to PCs, switches, or hubs.
Mounting Screws
"LED Indicators" on page
– 32 –
27.