Variables - Michell Instruments Condumax II User Manual

Condumax II User's Manual
3.10.3 Variables Page 1
For more information on each variable refer to Appendix D.1.
Variable
MODE
TRIP POINT
TRIP TEMP
MAX COOL
CYCLE TIME
MIN COOL
RESET LOG
3.10.4 Variables Page 2
This page contains the variables to confi gure the mA output ranges. For more information
on each variable refer to Appendix D.2.
Variable
OUTPUT1
O/P 1 MIN
O/P 1 MAX
OUTPUT2
O/P 2 MIN
O/P 2 MAX
3.10.5 Variables Page 3
For more information on each variable refer to Appendix D.3.
Variable
Wdp ALARM
HI DP ALARM
DEG C OR F
PRESS. UNIT
TIME
DATE
Michell Instruments
Brief Description
Instrument mode,
CONDENSATE
Hydrocarbon Condensation Trip Point (only available in
mode)
MEASURE
Optical Surface Trip
mode)
CONDENSATE
Maximum Cooling Time
Frequency of Measurement Cycles
Minimum Cooling Limit
Resets the Logging Statistics
Brief Description
mA1 Output configuration
Value that 4 mA represents for Output 1
Value that 20 mA represents for Output 1
mA2 Output configuration
Value that 4 mA represents for Output 2
Value that 20 mA represents for Output 2
Brief Description
Water dew-point alarm point
High hydrocarbon dew-point alarm point
Units for temperature and dew point
Units for pressure
Real time clock
Calendar
OPERATION
or
MEASURE
Temperature (only available in
33