User Set-Up Variables (Passcode Required); Figure 16 User Set-Up Variables Page - Michell Instruments XTP601 User Manual

OPERATION
2.7

User Set-Up Variables (Passcode Required)

In order to change any settings on the User Menu pages, the user must enter a passcode.
There is also a separate passcode for service engineers to allow factory setting changes.
To access the User Menu press the
passcode prompt. Use the
value.
The User Passcode is:
Use the () and
Up
the button. This will give access to one of the following pages.
ENTER
14
ENTER
() and
Up Down (
1919
SETTINGS
HMI
RESET
OUTPUTS
Figure 16 User Set-Up Variables Page
) buttons to select the sub-menu required. Then press
Down (
XTP601 User's Manual
button from the Main Page to call up a
) buttons and press
EXT COMP.
EXT SENS.
CLOCK
FIELD CAL
97313 Issue 5, May 2018
after each
ENTER