Deutsch Hd, Dt, Dtm, Drc Series; Amp Seal; Amp Mate-N-Lok - JLG T500J Service And Maintenance Manual

SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS

Deutsch HD, DT, DTM, DRC Series

The Deutsch connector system is commonly used for harsh
environments. Follow installation instructions.
Figure 7-6. Deutsch Connector

AMP Seal

The AMP Seal connector system is used on Control ADE Plat-
form and Ground Modules.
Apply dielectric grease to the plug/male connector housing
which typically contains socket contacts/female terminals. If
trapped air prevents the connector from latching, pierce one
of the unused wire seals. After assembly, install a seal plug (JLG
#4460905) in that location to prevent moisture ingress.
Note that seal plugs may be installed by the wire harness man-
ufacturer if an unused wire seal becomes compromised (wire
inserted in the wrong cavity during assembly and the cor-
rected).
Figure 7-7. Application to plug/male connector housing
7-6
Figure 7-8. Use of Seal Plugs

AMP Mate-N-Lok

Follow manufacturer installation instructions.
Figure 7-9. AMP Mate-N-Lok Connector
3121200