Disassembly - JLG T500J Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM

Disassembly

1. Using an adequate supporting device, support the jib
cylinder assembly so it doesn't fall when the pivot pin is
removed.
2. Remove the bolt, keeper pin, upper and lower pivot pin
securing the platform pivot from channel and jib assem-
bly.
3. Using an adequate lifting device, support the weight of
the platform pivot.
NOTE: The pivot weighs approximately 24 lbs. (11 kg).
4. Remove the pivot from the jib assembly.
4-6
5. Remove the hardware securing the platform level and
jib assembly.
6. Remove the hardware securing the platform level cylin-
der.
MAE30290
7. Remove the Platform level cylinder. Refer Section 4.7,
Platform Level Cylinder.
8. Remove the hardware securing the telescope cylinder to
the boom base section.
MAE30690
MAE31680
MAE30400
3121200