6.5 Machine Setup; Level Vehicle Description - JLG T500J Service And Maintenance Manual

6.5 MACHINE SETUP

When a machine digit item is selected, press UP
DOWN arrow keys to adjust its value, for example:
GROUND ALARM:
ESC
GROUND ALARM:
2 = MOTION
The effect of the machine digit value is displayed along with
its value. The above display would be selected if the machine
was equipped with a ground alarm and you wanted it to
sound when lifting down. There are certain settings allowed to
install optional features or select the machine model.
When selection the machine model to match the size of the
machine, the personality settings will all default to the factory
recommended setting.
NOTE: Refer to Table 6-3, Machine Model Adjustments and Speeds
- ANSI & CSA and Table 6-4, Machine Model Adjustments
and Speeds - CE Only for the recommended factory set-
tings.
NOTE: Password 33271 will give you access to level 1, which will
permit you to change all machine personality settings.


3121200
2 = MOTION
ENTER
MAE19060

Level Vehicle Description

or
DO NOT LEVEL VEHICLE EXCEPT ON A LEVEL SURFACE.
LEVEL Vehicle:
LEVEL VEHICLE
YES:ENTER, NO:ESC
Not available at password level 2. ENTER
cle is currently level, and zeroes the tilt sensor measurements.



































































SECTION 6 - JLG CONTROL SYSTEM
YES:ENTER, NO:ESC
ESC ENTER
MAE19060
confirms vehi-
6-5