JLG T500J Service And Maintenance Manual page 22

SECTION 1 - SPECIFICATIONS
4. Swing Bearing
Lube Point(s) - 1 Grease Fitting
Capacity - As Required
Lube - MPG
Interval - Every month or 50 hours
Comments - Rotate the bearing back and forth
to ensure grease is distributed evenly the whole
way around the bearing.
5. Swing Bearing Teeth
Lube Point(s) - Spray On
Capacity - As Required
Lube - OGL
Interval - Every month or 50 hours
Comments - More frequent lubrication intervals may
be required.
6. Swing Drive
Lube Point(s) - 2 Grease Fittings
Capacity - As Required
Lube - MPG
Interval - As Required.
DO NOT OVERGREASE BEARINGS. OVERGREASING BEARINGS WILL RESULT IN
BLOWING OUTER SEALS IN HOUSING.
1-6
7. Engine
Capacity - See Engine Manual.
Lube - EO, 10W30 API SJ
Interval - Check level daily; change per 
manufacturer's engine manual.
Comments - Adjust final oil level by mark on dipstick.
8. Fuel Tank
a. Engine (Prior to SN 0030004208)
Capacity - 1.6 Gal. (6 L)
Fuel - Gasoline
Interval - Check periodically during each shift.
b. Engine (SN 0030004208 to Present)
Capacity - 1.5 Gal. (5.7 L)
Fuel - Gasoline
Interval - Check periodically during each shift.
3121200