ioThinx 4510 Series
Loading Factory Default Settings
There are three ways to restore the device to factory default settings.
1. Follow the steps to load the factory default settings from the web console.
Step 1: Go to the configuration page via Menu System Configuration
Step 2: Click Reset located under Load to Default and then the device will return to default settings.
NOTE
Loading the factory default settings will delete the configurations from this device. Please back up the
configurations before loading the factory default settings.
2. Follow the steps to load the factory default settings from IOxpress.
Step 1: Select Load Factory Default from the dropdown menu.
Step 2: Select the device(s), type the Username and Password, and then click Submit. IOxpress will
start to perform the task on the selected devices. The success message will show up in the Result column
when the process has been completed.
INFORMATION
Click Apply to All if the selected devices have the same settings.
5-19
Quick Start Guide
Need help?
Do you have a question about the ioThinx 4510 Series and is the answer not in the manual?