Moxa Technologies ioThinx 4530 Series Quick Installation Manual
Hide thumbs
Also See for ioThinx 4530 Series:
- Hardware user manual (23 pages) ,
- User manual (20 pages) ,
- Quick installation manual (10 pages)
Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies ioThinx 4530 Series
Summary of Contents for Moxa Technologies ioThinx 4530 Series
- Page 1 4530 Series Quick Installation Guide Version 1.5, September 2023 Technical Support Contact Information www.moxa.com/support 2023 Moxa Inc. All rights reserved. P/N: 1802045300006 *1802045300006*...
-
Page 2: Warning-Explosion Hazard
Introduction The ioThinx 4530 Series is an advanced modular controller with unique hardware and software design, making it ideal for a variety of industrial data acquisition applications. ATTENTION If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. -
Page 3: Package Checklist
Package Checklist • 1 x ioThinx 4530 Series product • 1 x console cable • 1 x quick installation guide (printed) • 2 x side cover plate Installation Connecting the System Power Connect your 12 to 48 VDC power source to the SP+ and SP- terminals on the ioThinx 4530 Series’... -
Page 4: Connecting The Field Power Ground
Connecting to the Network Ethernet Communication The ioThinx 4530 Series is equipped with two RJ45 LAN ports with two MAC addresses. Connect a network Ethernet cable to either port to provide an Ethernet connection to the unit. - Page 5 Serial Communication The ioThinx 4530 Series is equipped with a 3-in-1 serial interface that supports either 1 RS-232 port, 1 RS-422 port, or 2 RS-485 ports. Refer to the pin assignment table below for details. RS-232 RS-422 RS-485 (P1) (P1)
- Page 6 Installing a 45MR/ML Module on a DIN Rail Step 1: There are rails on both sides of the ioThinx 4530 Series head/CPU module. Align 45MR modules on the right side, and 45ML modules on the left side, making sure that the upper and lower rails are hooked together.
- Page 7 Step 1: Use your finger to lift the release tab on the lower part of the module. Step 2: Push the top of the release tab to latch it, and then pull the module out. NOTE Electrical connections for the internal bus will be disconnected when the 45MR/ML module is removed.
-
Page 8: Horizontal Installation
Horizontal Installation Before installing the device, make sure there is enough space between the device and nearby items (walls, other devices, etc.) to ensure proper heat dissipation. To ensure that the device works properly, we suggest reserving at least 30 mm of space on each of the four sides, as shown in the figure. -
Page 9: Loading The Factory Default Settings
Connecting to the ioThinx 4530 Series Controller Accessing the ioThinx 4533 Series Using a PC You can use a PC to access the ioThinx 4533 Series by one of the following methods: 1. Through the serial console port by the console cable with the... -
Page 10: Specifications
3. Cables rated for a minimum temperature of 120°C must be used for the power supply terminal. 4. We suggest using the following cable types for wiring: ioThinx 4530 Series: • AWG 12 to 16 for power connections (Ferrule diameter: 2.053 mm to 1.291 mm), with 10 mm wire strip length. -
Page 11: Atex Information
ATEX Information Ex ec IIC T4 Gc UL 20 ATEX 2412X 1. Standards covered: EN IEC 60079-0:2018 EN IEC 60079-7:2015 + A1:2018 EN IEC 60079-15:2019 2. Conductors suitable for Rated Cable Temperature ≥ 120°C 3. Ambient Range : -40°C ≤ Tamb ≤ 75°C (with -T model) Ambient Range : -20°C ≤...
Need help?
Do you have a question about the ioThinx 4530 Series and is the answer not in the manual?
Questions and answers