Moxa Technologies ioThinx 4510 Series User Manual page 29

ioThinx 4510 Series Software Tools
DO Channel (Pulse Mode): It shows the status of this channel. Click START or STOP to change the pulse
output status.
Relay Channel: It shows the status of this channel. Click ON or OFF to change the relay status.
AI Channel: It shows the status of this channel. Click RESET to reset the minimum and maximum values.
RTD Channel: It shows the status of this channel. Click RESET to reset the minimum and maximum values.
TC Channel: It shows the status of this channel. Click RESET to reset the minimum and maximum values.
Apply the reference temperature value in the calibration field and click SET to execute calibration.
Connection
The connection page shows the connection status from other hosts. This information can assist you with
managing your devices.
4-6