Telemetry Information Display Settings - FUTABA T4PM Instruction Manual

(Current drive battery capacity )
Select the setting item "CAPACITY" by moving the (JOG) but-
ton up or down, and display the external power supply capacity
screen by pressing the (JOG) button.
1
(Setting of each item)
Select the setting item "ALRM" by moving the (JOG) button up
or down., and set alarm ON/OFF with the (+) button or (-) but-
ton.
" "
" "
2
(Setting the external power supply capacity alarm)
Select the setting item "LIMT" by moving the (JOG) button up
or down, and set the capacity at which the alarm begins to
sound with the (+) button or (-) button.
When finished with the setting, return to the TELEMETRY
screen by pressing the (END) button.

Telemetry information display settings

In the " DISP "
"
RXVOL
RPM Sensor Receiver voltage
information information
Temperature Sen- Voltage Sensor
sor information information
Motor RPM information
Motor temperature
information
" setting of "
"
Current drive battery
capacity information
Current drive battery elec-
tric current information
MC970
ESC internal temperature
information
Current drive battery voltage information
Telemetry "TELEMETRY"
Alarm ON/OFF
ON, OFF
- Select with the (+) or (-) but-
tons.
Capacity alarm
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
CURR
Current drive battery voltage
information
121