FUTABA T4PM Instruction Manual page 120

Setting the current sensor
(Preparation)
MODE: RX (Page 2)
(Current drive battery electric current)
Select the setting item "CURRENT" by moving the (JOG) but-
ton up or down, and display the external power supply current
screen by pressing the (JOG) button.
1
(Setting of each item)
Select the setting item "ALRM" by moving the (JOG) button up
or down., and set alarm ON/OFF with the (+) button or (-) but-
ton.
" "
" "
2
(Setting the external power supply voltage alarm)
Select the setting item "LIMT" by moving the (JOG) button
up or down, and set the current at which the alarm begins to
sound with the (+) button or (-) button.
When finished with the setting, return to the TELEMETRY
screen by pressing the (END) button.
(Current drive battery voltage)
Select the setting item "VOLTAGE" by moving the (JOG) but-
ton up or down, and display the external power supply voltage
screen by pressing the (JOG) button.
1
(Setting of each item)
Select the setting item "ALRM" by moving the (JOG) button up
or down., and set alarm ON/OFF with the (+) button or (-) but-
ton.
" "
" "
2
(Setting the external power supply voltage alarm)
Select the setting item "LIMT" by moving the (JOG) button
up or down, and set the voltage at which the alarm begins to
sound with the (+) button or (-) button.
When finished with the setting, return to the TELEMETRY
screen by pressing the (END) button.
120
Telemetry "TELEMETRY"
Alarm ON/OFF
ON, OFF
- Select with the (+) or (-) but-
tons.
Current alarm
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Alarm ON/OFF
ON, OFF
- Select with the (+) or (-) but-
tons.
Voltage alarm
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).