Telemetry Meter Display Settings - FUTABA 7PXR Instruction Manual

Five telemetry meters displayed on the home screen are displayed. You can select the sensor
to display and set the range of display data. It can be set for each meter.
Home screen
Tap the [Reset] button for "min./
max." to reset the maximum value
indicated by the white pointer on
the meter on the home screen.
At the same time, the "Min" and
"Max." displays on each telemetry
setting screen are reset.
176

Telemetry meter display settings

Tap meter to set display
range etc.
Display the screen to select
the sensor to be displayed.
When the sensor to be
displayed can measure
m u l t i p l e d a t a , s e l e c t
which data to display.
Set the upper limit/lower
limit displayed on the me-
ter.
Tap to select sensor
to display
In the case of a current sensor,
for example, it is possible to select
from current/voltage/consumption
capacity, to select data to display
from a plurality of data.
It is also possible to display all
three data with separate meters.
Tap the value button of the [Max.]
and [Min]. Value input buttons ap-
pear on the screen. Use the [+] and
[-] buttons to adjust the upper limit
and lower limit amount.
Sensor