Software Update; Update - FUTABA T4PM Instruction Manual

Software Update

croSD card.
Caution:
should be fully charged.
Update method
1
Extract the zip file on your computer. The "FUTABA" folder will be created on your computer
and copy the "FUTABA" folder onto your microSD card.
Note: If the microSD card has already had "
2
Insert the microSD card with "FUTABA" folder that contained the update software into the
SD card slot on your the T4PM.
3
Turn on the T4PM power while pressing
down the "END" button. The software update
is started.
4
When the software update is completed,
"SUCCESS" message is shown on the LCD
display of your T4PM.
5
Turn off the power switch of your T4PM and
remove the microSD card from the card slot.
Caution
Always insert and remove the microSD card in the state in which the transmitter power is off.
If the microSD card is removed while being accessed (read or write), the card itself and the data may be destroyed.
Do not install and remove the microSD card with the microSD card slot facing your face.
If you remove your fingers quickly, the microSD card may fly out and strike your face and is dangerous.
Since the microSD card is a precision device, do not subject it to unreasonable force or shock.
128
"
*Remove the card by pushing it in and then pulling it out.
*Install and remove the card by pushing it in until you hear
a click.
(Commercial product)
SD standard and SDHC standard microSD cards
SD/SDHC format. Maximum size 32GB.
(Some models may not be operated by card.)
SDXC format is not supported.
*The data in the memory card cannot
Software Update
" folder is
"
Cover
be guaranteed regardless of the con-
tents and cause of trouble or dam-
age. Always back-up the valuable
data in the memory card.
-