FUTABA T4PM Instruction Manual page 83

Using the ESC Link function
(Preparation)
-Connect the T4PM and ESC in accordance with the connection diagram, and connect the
battery to ESC.
1
Display the MC LINK function screen in the above manner.
2
(ESC read)
Execute this function to read the connected ESC type
and the data currently set at the ESC. Select the set-
ting item "MODE" by moving the (JOG) button up or
down. Select "READ" by (+) or (-) button, and press the
(JOG) button.
contents are read.
- If "
"
3
(Writing to ESC)
Execute this function to write the setting data to ESC.
See pages 84~89 for the setting data contents.
Select the setting item "MODE" by moving the (JOG)
button up or down. Select "WRITE" by (+) or (-) button,
and press the (JOG) button.
-"
"
-If "
"
4
(Initialization)
This function writes the ESC setting data set at the fac-
tory to the connected ESC and T4PM. Perform "READ"
before performing initialization.
Select the setting item "MODE" by moving the (JOG)
button up or down. Select "RESET" by (+) or (-) button,
and press the (JOG) button.
- "
"
" "
ESC Link Function "MC LINK"
" "
" "
"RESET" cannot be
83