FUTABA T4PM Instruction Manual page 60

4
(Cycle speed adjustment)
Select setting item "CYCL" by
moving the (JOG) button up or
down. Use the (+) or (-) button to
adjust the pulse speed (cycle).
5
(Trigger point setup)
Select setting item "TG.P" by
moving the (JOG) button up or
down. Use the (+) or (-) button to
adjust the operating point.
6
(Cycle duty ratio setup)
Select setting item "DUTY" by
moving the (JOG) button up or
down. Use the (+) or (-) button to
select the duty ratio.
" "
"HIGH"
7
When finished with the adjustments, return to the MENU
screen by pressing the (END) button.
Dial / Trim Setting
Switch setting
60
CYCL
CYCL (Cycle)
TG.P
TG.P
(Trigger point)
Brake side
TGP
Neutral
DUTY
Y: (Brake return time)
X: (Brake
application time)
DUTY (duty): X and Y ratio
A.B.S. Function "TH A.B.S"
Cycle speed (CYCL)
1 ~ 30
Initial value: 10
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Trigger point (TG.P)
10 ~ 100
Initial value: 30
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
-
Duty ratio (DUTY)
LOW - MID - HIGH
Initial value: MID
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).