FUTABA T4PM Instruction Manual page 112

Using the fuel down timer
(Preparation)
Select the setting item "TYPE" by moving the (JOG) button up
or down. Press the (+) or (-) button and select "DOWN".
1
(Alarm time setting)
Select the setting item "ALRM" by moving the
(JOG) button up or down. Set the alarm time
with the (+) or (-) button.
2
(Alarm start/restart operation)
When the switch ("TIMER") set by function se-
lect switch function is pressed, the timer starts.
When the same switch is pressed while the tim-
er is operating, the timer is reset and simultane-
ously restarted. (Restart)
- Linking only start to the throttle trigger
Select the setting item "RST" by moving the
(JOG) button up or down and press the (JOG)
button for approximately 1 second. When the
set beeps and the status display switches from
"RST" to blinking "RDY", the system enters the
trigger operation ready state.
When the trigger is operated at the forward
side, the timer starts. (Status display "RUN")
If the (END) button is pressed while the timer is
operating, the LCD returns to MENU screen.
3
(Timer reset operation)
Select a status display ("RUN") by moving the
(JOG) button up or down and press the (JOG)
button for approximately 1 second. A beeping
sound is generated and "RST" appears on the
status display and the timer resets.
112
Timer Function "TIMER"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons si-
multaneously (approx. 1 sec) to
return to the HOME screen.
Alarm time (ALRM)
OFF, 1 ~ 99 m
Initial value: 5 m
Switches
Timer start / restart
Status display
RST: Reset state
RDY: Throttle trigger operation wait
RUN: Timer running
Operation wait
: Press the (JOG) button
TRG: Throttle trigger operation
Status display
RST: Reset state
RDY: Throttle trigger operation wait
RUN: Timer running