Adjusting The Liquid Crystal Contrast; Setting The Liquid Crystal Backlighting Mode; Setting Liquid Crystal Backlighting Time; Setting Liquid Crystal Backlighting Brightness - FUTABA T4PM Instruction Manual

System function setup
1
(Setting of each item)

(Adjusting the liquid crystal contrast)

Select the setting item "CONTRA" by moving the
(JOG) button up or down, and use the (+) and (-)
buttons to adjust the screen contrast.
When finished with the setting, return to the
MENU screen by pressing the (END) button.

(Setting the liquid crystal backlighting mode)

Select the setting item "BK-LHT" by moving the
(JOG) button up or down, and select the mode by
pressing the (+) or (-) button.
" "
" "
" "
When finished with the setting, return to the
MENU screen by pressing the (END) button.

(Setting liquid crystal backlighting time)

Select the setting item "LHT-TM" by moving the
(JOG) button up or down, and use the (+) and (-)
buttons to set the ON time.
" "
fective.
When finished with the setting, return to the
MENU screen by pressing the (END) button.

(Setting liquid crystal backlighting brightness)

Select the setting item "LHT-PW" by moving the
(JOG) button up or down, and use the (+) and (-)
buttons to set the ON time.
When finished with the setting, return to the
MENU screen by pressing the (END) button.
42
System Functions "SYSTEM"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons si-
multaneously (approx. 1 sec) to
return to the initial value.
Contrast (CONTRA)
-10~0~+10
Initial value: 0
Backlight mode (BK-LHT)
KEY, ALL, OFF
Backlighting time (LHT-TM)
1~30
Initial value: 10
Backlighting brightness
(LHT-PW)
1~30
Initial value: 15