FORK
WHEEL SHAFT
• Remove:
- Front mudguard (p. 28)
- Front wheel (p. 31)
- Brake caliper (for left shaft)
(p. 32)
- Odometer sensor (for left shaft) (p. 30).
• Loosen (V)
• Lift the shaft a few millimeters (A).
• Remove the spring ring (B).
• Slide the shaft downwards (A).
V
30 ± 20%
B
F. 75
• Insert a measuring pin or a caliber and make
sure the oil is at a depth of 110 mm (approx.
3,93 inches) from the upper rim of the shaft.
• If necessary, fill up with oil:
FORK OIL ~ 90 cc per shaft
OIL LEVEL CHECK
• Block the wheel shaft in a clamp, in vertical
position.
• Remove:
- Cover (A)
- Seeger ring (B)
V
- Propeller nut (C), complete with O-Ring (D)
- Spring (E) (let oil drip off it)
A
• Bring the shaft (F) to its end-of-travel position.
F. 77
33
07/07
F. 76