Feasible Position And Location Of The Oil Tank - Rotax 914 F Installation Manual

13.5) Feasible position and location of the oil tank

See illustration 29.
The longitudinal axis z3 to be parallel to z-axis of the system of coordinates.
Tolerated deviation of parallelism: ± 10°
NOTE:
The oil tank Q has to be positioned in its z-axis such that the oil level W is always
between 0 and -400 mm on the z-axis .
WARNING: At higher location of the oil tank oil might trickle through clearances
Install the oil tank free of vibrations.
Oil tank cover E and oil drain plug to be easily accessible.
5
3
+z3
2
1
-z3
4
Date
Page
1996 05 10
46
Above notice is valid for both planes.
at bearings into crankcase during longer periods of engine stop. If
fitted too low it might badly effect the oil circuit.
-y
5
Install
914 F
+z
P
-z
Reference
+y
Ill. 29
Modification-No.
- 0 -