Record Playback Example - Agilent Technologies FieldFox N9913A User Manual

 Then choose from the following:
 Then
 Then choose from the following:

Record Playback Example

The following "Interval Recording" example shows how you can record spectral
activity over a longer period of time with less trace storage.
 Press Trace 6 then, with
 Then
 Then
 Then
 Then
 Then
 Then
 Then
 Then
 Then
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as
it was recorded.
 Press Trace 6 then with
 Then
 Then
126
Internal
FieldFox memory (default)
o
SD Card
An external SD Card (must be inserted)
o
USB
An external USB flash drive (must be inserted)
o
Manage Sessions
Name
Using the FieldFox labeler, change the name of the session.
o
AutoSession (n) is the default name where (n) is the next-available number.
Learn how to use the labeler on page 164.
Sort
Arrange the listing of sessions
o
Delete
After a confirmation prompt, removes the contents of the selected
o
session from the list.
Copy
Copies the selected session to a different storage device, or the same
o
storage device with 'Copy_' appended to the beginning of the name.
Copy All
Copies ALL of the listed sessions to a different storage device, or
o
the same storage device with 'Copy_' appended to the beginning of the
names.
Record Playback Setup
New Session
Recording Configuration
Record Source
to Trace1
Record Interval to 10 s(seconds).
Back
Recorder Player
Record
At the end of each 10 second record interval, the Max Hold trace
is recorded and the Max Hold processing is reset for the next 10 second record
interval.
Stop
to end the recording.
Record Player
Play
by Name,
Trace State
= 1, press
Trace State
= 1 and press
by Date, or by (file) Size.
Max Hold
then
Clr/Wr
then
FieldFox User's Guide