How To Record A Session; How To Playback A Session - Agilent Technologies FieldFox N9913A User Manual

How to Record a Session

 Press Trace 6
 Then
 Optionally set resolution (points). Learn how on page 98. This can NOT be
 Then either:
 Then
 Then
REC
During recording, choose from the following:




How to Playback a Session

 Press Trace 6
 If the session is already open, skip the following step. Otherwise:
 Then
 Then
 Then
PLAY
of the recording is reached, playback begins again at trace 1 and continues to
loop indefinitely.
During playback, choose from the following:

122
Record Playback Setup
changed after a session is opened.
New Session
OR
o
Recall Session
then
o
Recorder Player
Record
is displayed in the left of screen graticules.
Pause Resume
Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue recording.
Stop
Immediately stops recording. Then choose from the following:
Play
Press to start replaying the recording from the beginning.
o
Record
Press to continue recording.
o
User Tag
Press to insert a User Tag at the current recorded trace. This allows
you to quickly move to this location during playback. Learn more in About
State and User Tags on page 121.
Record Playback Setup
Recall Session
Press
o
Recorder Player
Play
is displayed in the left of screen graticules during playback. When the end
Pause Resume
Temporarily halts playback. Then choose from the following:
Pause Resume
Press to continue playing.
o
Playback State/Tag
o
scroll through the state tags. Enter a value between 1 and the total number
of state tags using the numeric keypad, ▲|▼ arrows, or the rotary knob.
Learn more in About State and User Tags on page 121.
Open
and select a session.
Then select a session to playback and press Open.
Allows you to continue playback from a state tag, or
FieldFox User's Guide