How to set Power ON
Press System 7
Then
Then
Then choose from the following:
Service Diagnostics
The Service diagnostics menu is generally used to display service-related
System Information
The System information table shows important information about your FieldFox.
The following is the most useful information:
Model Number – FieldFox model
Serial Number – Identification number of your FieldFox
Firmware Release – The currently installed version of software. Check to see
Network Identity – The network name and current IP address of your
NA Factory Cal - The NA Factory (CalReady) Calibration shows the date and
The factory calibration is updated when you send your FieldFox to Agilent for
Instrument Calibration. Learn more on page 215.
Error Log
The Error Log shows the information that has appeared on the FieldFox screen.
The most recent information is at the top of the table.
Press
Battery
Learn about this table on page 188.
Internal Temperatures
Learn all about this table and the importance of the internal FieldFox
temperatures on page 12.
186
System Configuration
Power ON
Auto
The FieldFox will power ON when a charged battery or the DC Adapter
o
is inserted.
Manual
The FieldFox will power ON only when the power button is pressed.
o
information. To access these menu items, press System 7 then
Diagnostics.
if you have the latest firmware at:
FieldFox.
time that the factory cal was performed for each test port and the Thru
connection. The format is P1 <date time>, P2 <date time>, P1-P2 <date time>.
Clear Errors
to erase this information.
www.agilent.com/find/fieldfoxsupport
Service
FieldFox User's Guide