Table of Contents
Advertisement
Using NetMeeting
Connecting With NetMeeting
4-50
Chapter 4 Operation of Optional Items
5
Click on the [Properties] button, then select the transfer rate to be used.
When the T.120 rate is set to 38.4K, select 38400 and the T.120 rate is
set to 9.6K, select 9600.
Check that the following settings:
Data bits : 8, Parity : None, Stop bit : 1, Flow control : None
6
Click on the [OK] button repeatedly until the menu returns to its first
one.
1
Set the Rollabout Processor to be on line.
2
Click on [Calling] at both local and remote.
3
Set [Address] in the [New call] dialog box to COM1 or COM2, and
[Call Using] to NULL Modem.
Click on the [Call] button.
Soon, the connection is established.
Note
When connecting both PCS-5100/5100Ps, you can start a meeting from
both sides by clicking on [New Call]. But when the remote party
equipment is other companies equipment, the connection may be failed if
PCS-5100/5100P clicks on [New Call] first. In such cases, first click on
[New Call] from the remote party.
Advertisement
Table of Contents
