Table of Contents
Advertisement
Location and Function of Parts and Controls
!™ BACKUP switch
Retains the memory of the preset and clock settings.
!£ MIC jack
This jack cannot be used with this system.
!¢ POWER switch
Turn on the camera unit. This switch is set to on at the
factory.
Remote Commander
1 POWER ON button
Press this button to turn on the Rollabout Processor
once in the standby mode.
Note
You cannot turn off the Rollabout Processor with this
button.
2 MIC MUTE button
Press to mute local conversations so that they will not
be sent to the remote party. Press again to discontinue
muting.
A-6
Appendix
!∞ DC IN 13.5V jack
Connect to the Rollabout Processor with the supplied
camera unit cable.
!§ VISCA OUT jack
This jack cannot be used with this system.
!¶ VISCA IN jack
Connect to the Rollabout Processor with the supplied
camera unit cable.
1 POWER ON button
2 MIC MUTE button
3 Cursor button
4 Execute button
5 Battery compartment (rear)
Remote Commander
3 Cursor button (Z, 4, z, $)
Press in the direction you want to move the cursor on
the TV monitor screen.
4 Execute button
Press this button to select an icon.
5 Battery compartment (rear)
Insert two size AA (LR6) alkaline batteries. (page A-7)
Advertisement
Table of Contents
