Table of Contents
Advertisement
Using Dual Monitors
To turn on and off the dual-monitor mode
To view the picture in dual-monitor mode
4-32
Chapter 4 Operation of Optional Items
When shipped, the dual-monitor mode is set to off. Use the SETUP menu
to turn on the mode as follows:
1
Bring up the SETUP menu.
See page 2-10 for how to bring up the SETUP menu.
2
Move the cursor to [DUAL MONITOR], then select [ON].
3
Select [EXIT].
The dual-monitor mode is turned on.
Note
The PCS-G510/G510P Dual Monitor Board must be installed in the PCS-
5100/5100P Rollabout Package to display still pictures on the TV monitor
designated for still pictures. If the board is not installed, you cannot select
[ON] in step 2.
When the dual-monitor mode is turned on, the monitors function as
follows:
If [DRAW] is not selected from the GRAPH menu (during a
normal meeting)
Motion picture TV monitor
The remote scene (motion picture)
appears.
• The menu appears at the bottom of the
screen.
If [DRAW] is selected from the GRAPH menu
Motion picture TV monitor
The remote scene (motion picture)
appears.
Notes
• If you switch off the dual monitor mode on a dual monitor system, both
still and moving pictures will be displayed on the first monitor.
• If you have selected [4CIF] from [GRAPHIC] in the SETUP menu, the
still picture will not be displayed on the still picture TV monitor.
Still picture TV monitor
Still pictures taken by the document
scanner or video presentation stand
appear.
Still picture TV monitor
Freehand drawings can be done
using the PCS-T500 Drawing Tablet
(not supplied).
• The drawing tool menu appears at
the bottom of the screen.
Advertisement
Table of Contents
