Precautions - Sony PCS-5100 Operating Instructions Manual

Rollabout package
Table of Contents

Advertisement

Precautions

Precautions
On Safety
On Handling
6
Precautions
Power supply
• Before operating the Rollabout Package, make sure the operating voltage
of the unit is identical with that of your local power supply. The Remote
Commander operates on two size AA (R6) alkaline batteries.
• Do not unnaturally bend or crimp power cords, and do not place heavy
objects on them. Damage to the cords may result in fire or electric shock.
• To remove a power cord from an AC outlet, pull on the plug. (Do not pull
on the cord.)
Do not disassemble the system.
Do not open or disassemble the cabinets of the system. Electric shock may
result if you touch the inside of the cabinets.
Do not put foreign objects into the system.
Avoid having metallic or flammable object, liquid, or foreign matters fall
into the cabinets of the system. Otherwise a malfunction may result.
In case of trouble
In case of trouble such as smoke, odd smell, or noise, turn off all units of
the system. Disconnect all the power cords and connecting cords. Then
contact the place of purchase or an authorized Sony representative.
ISDN
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Installation/storage
Do not expose the system to:
• extremely low or high temperatures.
• damp or dusty room.
• strong vibration.
• devices which generate strong magnetic fields.
• devices (such as radios or TVs) which transmit strong radio wave.
• noisy place.
Cleaning
Wipe the cabinets and panels with a dry, soft cloth. If the stain is serious,
slightly moisten the cloth with mild detergent. Afterward, use a dry cloth
to wipe it. Do not use solvents such as thinner, benzine, alcohol, as they
may damage the finish of the cabinets.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-5100p

Table of Contents