Table of Contents
Advertisement
8 y terminal
Connect the earthing wire to this terminal.
9 AC OUT socket (for TV monitor) (independent
power source) (PCS-5100 only)
Connect the TV monitor power cable to this outlet.
0 PRINTER connector (half pitch 20-pin, female)
Connect the printer to this connector.
!¡ AUX. CONTROL connector (D-sub 9-pin, male)
Connects with exterior equipment for exterior control
of the Rollabout Package.
!™ USER DATA connector (D-sub 9-pin, male)
Connect an RS-232C device to this connector for data
input/output.
!£ ISDN A/B/C jacks (8-pin modular)
Connect the ISDN lines (up to three lines) to these
jacks using ISDN modular cables. When plugging in
the ISDN modular cable, always use jack A first,
followed by B, and finally C.
!¢ IR OUT 1/2 jacks
Connect the IR repeaters (supplied) to these jacks.
!∞ SCANNER connector (half-pitch 50-pin)
Connect the PCS-D200 Document Scanner (not
supplied) to this connector.
!§ VIDEO IN AUX1 jack (mini DIN 4-pin)
Connect to the video output jack of a VCR or other
video equipment (not supplied).
!¶ VIDEO IN AUX2 jack (phono jack)
Connect to the video output jack of a VCR or other
video equipment (not supplied).
!• VIDEO IN OBJECT jack (mini DIN 4-pin)
Connect to the video output jack of the video
presentation stand (not supplied).
!ª AUDIO IN AUX jack (phono jack)
Connect to the audio output jack on audio or video
equipment (not supplied).
@º AUDIO OUT (FAR/NEAR) jacks (phone jack)
Connect the FAR jack to the audio input jacks with the
supplied audio connecting cable.
@¡ AC IN socket
Connect one end of the Rollabout Processor power
cable to this socket and connect the other end to an AC
power outlet.
A-3
Appendix
Advertisement
Table of Contents
