External Microphone Kit - Sony PCS-5100 Operating Instructions Manual

Rollabout package
Table of Contents

Advertisement

Location and Function of Parts and Controls

External Microphone Kit

1 PROCESSOR connector
2 STANDBY lamp
3 MIC2 PLUG IN POWER jack
1 PROCESSOR connector (Mini DIN, 8-pin,
female)
Connect the Rollabout Processor to this connector.
2 STANDBY lamp (orange)
Flashes when the POWER switch on the Rollabout
Processor is pressed and continues flashing until the
system goes into standby.
Once in standby, the lamp remains on.
3 MIC2 PLUG IN POWER jack (monaural
minijack)
Connect the supplied Microphone to this jack.
4 MIC1 PLUG IN POWER jack (monaural
minijack)
Connect the supplied Microphone to this jack.
A-4
Appendix
5 TABLET connector
4 MIC1 PLUG IN POWER jack
External Microphone Kit
5 TABLET connector (Mini DIN, 6-pin, female)
Connect the PCS-T500 Drawing Tablet (not supplied)
to this connector.
6 ON lamp (green)
Lights when the system is turned on.
7 SYSTEM ON button
When the Rollabout Processor is in standby, press this
button to turn on the Rollabout Processor.
8 MIC3 PLUG IN POWER jack (monaural
minijack)
Connect the supplied Microphone to this jack.
6 ON lamp
7 SYSTEM ON button
8 MIC3 PLUG IN POWER jack

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-5100p

Table of Contents