Table of Contents
Advertisement
Starting a Meeting
To start a meeting using non-ISDN lines
3-10
Chapter 3 Conducting a Meeting
If you use the V.35, X.21 or RS-449 interface with private lines or a
terminal adapter, start the meeting as follows:
If you are using the V.35 or X.21 line interface and are making connection
with a remote party for which a "V" or "X" has been entered on the
telephone number column in the DIAL SETUP menu, or if you wish to
make connection with a remote party using the RS-449 line interface,
select from the DIAL LIST menu your party and the remote parties you
wish to connect with and select [DIAL.]
If you are using a terminal adapter, connect the line at the terminal adapter
side first.
If you are using the V.35 or X.21 line interface and are making connection
with a remote party for which a "V" or "X" has not been entered in the
DIAL SETUP menu line number column, select the remote party you wish
to contact from the DIAL LIST menu and select [DIAL].
This automatically connects your system to the remote party.
Note
If you use an ISDN line, be sure to turn off any other equipment with
automatic answering functions (e.g., G4 facsimile) connected to it.
Advertisement
Table of Contents
