Table of Contents
Advertisement
Basic Adjustments
Muting Local Conversations (Mute Function)
Adjusting the Image Sent From the Remote Party
Displaying the Pointer
1-18
Chapter 1 Using the Basic System
You can mute local conversations by pressing the MIC MUTE button on
the Remote Commander.
If you press the MIC MUTE button, local conversations will not be sent to
the remote party.
If local conversations are muted, the mute mark (
upper-right corner of the TV monitor.
To cancel muting
Press the MIC MUTE button again.
The mute mark (
) disappears.
To mute conversations from the PCS-T500 Drawing Tablet
If you use only the drawing tablet, select [AUDIO] from the MAIN menu
and select [MIC MUTE].
When local conversations are muted, the mute mark (
the upper-right corner of the TV monitor.
To cancel muting, select [AUDIO] from the MAIN menu then select [MIC
MUTE] again.
The mute mark (
) disappears.
You can change the direction of the image sent during a meeting.
For details, see "Sending Pictures from the Document Scanner" (page 4-5).
You can move the pointer (
meeting.
For details, see "Displaying the Pointer on the Remote Party Screen" (page 4-
23).
MIC MUTE button
) is displayed at the
) to any image on the TV monitor during a
) is displayed at
Advertisement
Table of Contents
