Table of Contents
Advertisement
SETUP menu items on the second page
Setting
AUDIO UNIT
SUB CAM CONTROL
OBJECT CAM
RGB
SCANNER
PRINTER
DUAL MONITOR
VID CONTROL
AUX1
AUX2
a) VGA and SVGA is a registered trademark of the International Business Machines
Corporation.
Note
The [BRI RATE] setting determines how the signals from the remote party
will be received. To adjust settings of your own party's transmission
signals, go to the DIAL SETUP menu.
For details on the DIAL SETUP menu, see page 2-2.
Description
Select OFF.
Select ON if controlling a sub camera.
Select ON if additional equipment is
connected to the VIDEO IN OBJECT jack.
Select PCS-G510 if a PCS-G510/G510P
Dual Monitor Board (not supplied) is
installed and computer is connected to the
RGB IN connector. Only VGA
format signals may be inputted.
Select PCS-D200 when using PCS-D200,
and select SCANJET when using Hewlett
Packard ScanJet 4C.
Select A4 when using A4 size paper, and
select LETTER when using LETTER size
one.
If the dual monitor board (PCS-G510/
G510P; not supplied) is installed and the
Rollabout Processor is connected to a
second monitor (with an S-VIDEO
connector), select ON. Select OFF if you do
not want to use the 2nd monitor.
Select VID-P100 when you want to control
the zoom for the VID-P100 Video
Presentation Stand (not supplied) from the
Rollabout Package, and select VID-P150
when you want to control the zoom, focus,
angle or preset for the VID-P150.
Select ON if additional equipment is
connected to the VIDEO IN AUX1 jack.
Select ON if additional equipment is
connected to the VIDEO IN AUX2 jack.
Chapter 2 Settings
a)
a)
and SVGA
2-27
Advertisement
Table of Contents
