Table of Contents
Advertisement
Preparing for a Data Conference
4-44
Chapter 4 Operation of Optional Items
11
Click on the [Setup] button.
The [Setup] dialog box appears.
12
Set up the bit rate.
• Set the bit rate to 9600 or 38400 according to your T. 120 rate.
• Check that [Stop Bits] is set to [One] and [Parity] is set to [None].
13
Set [Flow Control] to [Hardware] in [Advanced Options].
14
Click on [OK].
15
Click on [Close].
The setting is complete, and the original screen appears.
Advertisement
Table of Contents
